![]() |
Subcategories: 0 | Files: 69 |
ing. Adriaan Kragten
Aangezien ik al een aantal jaren met pensioen ben, heb ik niet langer inkomsten nodig uit de verkoop van mijn (Engelstalige) KD-rapporten over kleine windmolens. Ik heb daarom besloten dat vanaf nu alle openbare KD-rapporten gratis door iedereen gekopieerd mogen worden. Dit betreft tien extra rapporten met voormalige prijzen tussen € 20 en € 40. Mijn belangrijkste rapport is zeker KD 35: Rotor design and matching for horizontal axis wind turbines. Rapport KD 196 geeft vragen en antwoorden over elk hoofdstuk van KD 35 in het Engels en het Nederlands. Een lijst met alle 46 gratis KD-rapporten wordt gegeven als het eerste onderwerp van het menu KD-rapporten op mijn website: www.kdwindturbines.nl. Alle rapporten hebben een tamelijk lange titel die een goede indruk geeft van de inhoud.
Het recentste rapport is KD 598: Ideas about the 3-bladed VIRYA-0.65 water turbine with 20° inclined shaft coupled to the generator of the VIRYA-2.68 windmill for 12 V battery charging. |
![]() |
Download |
![]() ![]() |
|
Measurements performed on a generator with housing 5RN112M04V and a 4 - pole armature equipped with neodymium magnets KD200 |
![]() |
Download |
![]() ![]() |
|
Measurements performed on a generator with housing 5RN132M04V with a standard 400/690 V winding provided with a 4-pole armature with neodymium magnets KD82 |
![]() |
Download |
![]() ![]() |
|
Measurements performed on a generator with housing 5RN90L04V and a 4-pole armature equipped with neodymium magnets KD78 |
![]() |
Download |
![]() ![]() |
|
Development of a simple 6-pole, 2-phase axial flux permanent magnet generator for the VIRYA-1 windmill using a bicycle hub and 6 neodymium magnets size 25.4 * 25.4 * 12.7mm An axial flux ... |
![]() |
Download |
![]() ![]() |
|
Calculations executed for the 3-bladed rotor of the VIRYA-1.04 windmill (deltad=3.5, 7.14% cambered, aluminium blades) meant to be coupled to a Nexus hub dynamo. The 3-bladed rotor of the ... |
![]() |
Download |
![]() ![]() |
|
Development of an 8-pole, 3-phase axial flux permanent magnet generator for the VIRYA-1.36 windmill using 8 neodymium magnets size 25.4 * 25.4 * 12.7mm. Design report of the rotor (deltad= 5, B = ... |
![]() |
Download |
![]() ![]() |
|
Ideas about a direct drive 34-pole permanent magnet generator for the VIRYA-3.3S windmill using the stator stamping of an Indian 6-pole, 3-phase, 2.2 kW asynchronous motor frame size 112 and 51 ... |
![]() |
Download |
![]() ![]() |
|
Method to check the estimated δ-V curve of the hinged side vane safety system and checking of the δ-V curve of the VIRYA-4.2 windmill |
![]() |
Download |
![]() ![]() |
|
The Darrieus rotor, a vertical axis wind turbine (VAWT) with only a few advantages and many disadvantages |
![]() |
Download |
![]() ![]() |
|
Method to check the estimated δ-V curve of the hinged side vane safety system and checking of the δ-V curve of the VIRYA-3.3D windmill (7.14 % cambered steel blades) |